unisonic technologies co., ltd mbr10150c preliminary diode www.unisonic.com.tw 1 of 2 copyright ? 2011 unisonic technologies co., ltd qw-r601-039.a high voltage power schottky rectifier ? description the utc mbr10150c is a high voltage dual schottky rectifier, providing the designers with high current capacity and guard-ring for stress protection. the utc mbr10150c is suitable for medium voltage operation and high frequency circuits where low switching losses and low noise are required ? features * high surge capacity * low forward voltage * guard-ring for stress protection * pb-free to-220f 1 ? ordering information ordering number lead free halogen free package packing mbr10150cl-tf3-t MBR10150CG-TF3-T to-220f tube
mbr10150c preliminary diode unisonic technologies co., ltd 2 of 2 www.unisonic.com.tw qw-r601-039.a ? absolute maximum ratings (per diode leg) parameter symbol ratings unit dc blocking voltage v r peak repetitive reverse voltage v rrm working peak reverse voltage v rwm 150 v average rectified forward current (rated v r ) t c =142c i f(av) 5 a peak repetitive forward current (rated v r , square wave, 20 khz) t c =142c i frm 10 a non-repetitive peak surge current (surge applied at rated load conditions half wave, single phase, 60hz) i fsm 100 a voltage rate of change (rated v r ) dv/dt 10000 v/s operating junction tem perature (note 2) t j 150 c storage temperature t stg -55 ~ 150 c notes: 1. absolute maximum ratings are those values beyond which the device could be permanently damaged. absolute maximum ratings are stress ratings only and functional device oper ation is not implied. 2. the heat generated must be le ss than the thermal conductivity from junction-to-ambient: dp d /dt j <1/ ja . ? thermal data parameter symbol ratings unit junction to ambient ja 60 junction to case jc 4.5 c/w ? electrical characteristics parameter symbol test conditions min typ max unit i f =5a, t c =25c 0.92 instantaneous forward voltage drop (note 1) v f i f =5a, t c =125c 0.82 v rated dc voltage, t c =25c 0.1 instantaneous reverse current (note 1) i r rated dc voltage, t c =125c 15.0 ma note: 1. pulse test: pulse width=300s, duty cycle ? 2.0%. utc assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all utc products described or contained herein. utc products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. the information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice.
|
